caxa与cad(国外英文资料).docVIP

caxa与cad(国外英文资料) How to solve the open Dwg/Dxf file, the system prompted file error, can not open the problem Method 1: cancel the CRC check. After executing the [system settings] command, select the [data interface] in the parameter list on the left side of the pop-up dialog box and remove the selection in the check box of the [CRC check] as follows. How to solve the problem that the drawings, drawings, sizes and blocks can not be edited after converting the drawing of the electronic drawing board to the drawing of the AutoCAD Answer: in the electronic board file format for the Dwg/Dxf file, the default text, block size, save for the block form, as long as the data interface [Select] [size], [], [block] nuclear text box, the corresponding parts were scattered, so that you can freely edit. How to solve the conversion problem between a large number of CAXA electronic drawing boards and AutoCAD drawings? Answer: the use of CAXA batch conversion function can be achieved. CAXA electronic board can be the version of CAXA electronic board EXB file batch conversion for each version of the AutoCAD Dwg/Dxf file, can also be the version of AutoCAD Dwg/Dxf batch file into a EXB file, and set the path conversion. Operation as follows: The first step, click [file] the drop-down menu in the [Dwg/Dxf] command batch converter, pop-up dialog box, you can see the number of converter conversion will be Dwg/Dxf files into EXB files and EXB files will be converted to AutoCAD Dwg/Dxf file two. As shown in the following figure The second step, if it is converted to CAXA electronic board drawings AutoCAD drawings, select EXB file into a AutoCAD Dwg/Dxf file, and then click Settings option to convert data format, as shown below; if AutoCAD drawings into CAXA electronic drawing board, then select the DWG/DXF file into a EXB file. Without the need to select the data format. The third step is to select the file structure mode, which is based on the file list conversion and directory structure