VMWare上安装Ubuntu Server(国外英文资料).doc

VMWare上安装Ubuntu Server(国外英文资料) Installing more than one liunx release on VMWare, and finding that the Ubuntu server version is small and simple to install, find some information online to install Ubuntu server on the VMware, to the person in need. Linux operating system is now a lot of, dazzling, but there is a common problem, the installation disk is too large, often on 4, 5G. It also takes time to download. Looking around, I found that Ubuntu Server 7.04 is a good fit, with only one ISO file around 500M. Since it is a Server version, I dont think there are any big parts such as GUI and OpenOffice, which are not necessary for me. After downloading the Ubuntu Server version 7.04 through the thunderbolt, it is also easy to install on VMware and can be installed in less than 15 minutes. The next thing is to configure the network. Its the first time Ive ever played Ubuntu since Ive only used SuSE, so some configuration methods come from Google. For example, I dont know what the root password is, and use the sudo passwd root to set it up. Network configuration: After the VMware installation, there will be two default network cards, namely VMnet8 () and VMnet1 (), of course, on different machines, the IP of these two cards will be different. VMware has two ways to link a network, that is, using Bridged and NAT. The former requires XP broadband links (ADSL) to be set to shared mode to use. As telecom companies have recently searched for shared broadband, alas, so as not to get into trouble, Bridged is not the only way to adopt NAT. NAT way to use the VMNet8 network card, the main need to know Gateway, DNS two important IP. The first address (): the static address is assigned to the host Xp VMware Network Adapter VMnet8 adapter. Second address (): the static address is assigned to the NAT device for use. ( to 27) static address, reserved. (28 to 54) the scope of the:DHCP scope address assigned to the virtual machine. Modify the network configuration of Ubuntu: 1) set up IP