广联达梁、板、柱问答设计(国外英文资料).doc

广联达梁、板、柱问答设计(国外英文资料) Glodon beam plate column design question 1. when the dark columns in the shear wall are aggregated into the reports, the amount is aggregated into the column. What should I do to collect them into the shear walls? Answer: change the summary information of the dark column to the shear wall. 2, in the steel 9, shear walls, hidden columns how to enter? Answer: A adaptive dark column, automatic generation of dark column attributes, B new parameterized column (dark column). 3, column spiral stirrups in the setting must input parameters, otherwise not let the calculation, but after the input software is not calculated by the input parameters, is very troublesome? Answer: in the software, the column spiral stirrup parameter does not need to enter, directly reads the column and the hoop information. 4. How is the height of the foundation layer of the frame column defined? Answer: not defined, the software automatically find the base height, the basis of the top elevation to the base layer of the top elevation between the upper layer into the calculation. 5. Why did you draw a column on the base layer? Answer: because the base layer does not draw the foundation or the beam, the software will automatically find the basis of the current column, can not find it will not calculate the column inserted tendons. 6. After columns are generated, the columns are copied from other floors. How do they operate? Answer: in the pop-up window, select cancel. 7. How should the spiral stirrups of circular columns be input? Answer: in other stirrups input, select No. 13 stirrups, enter the stirrup information can be. 8. Does the enclosed area in the column attribute include the encryption area in the beam support? Answer: including. 9, Liang Shangzhu in the GGJ9.0 how to deal with? Answer: during modeling finished automatically according to the beam Shangzhu; non modeling method in establishing component component category Shangzhu beam, beam height in the smallest input l