炉外精炼用小型直流钢包炉的探讨t(国外英文资料).docVIP

炉外精炼用小型直流钢包炉的探讨t(国外英文资料) The principle and process of arc furnace steelmaking Process is generally the third phase, dry process can be divided into melting period, oxidation period, reduction period Principle: electric furnace training. Electric furnace practice steel is the use of electric energy as a heat source for smelting Commonly used circuits are arc furnace and induction furnace two, and arc furnace practice steel accounted for most of the electric furnace steel production. Generally speaking, electric furnace refers to arc furnace Electric furnaces can be made entirely of scrap metal, which can be used to smelt steels with strict mechanical properties and chemical composition, such as special tool steel, aviation steel and stainless steel According to the liner into furnace all two kinds of acidic and alkaline. At present mainly uses the basic electric furnace, the furnace can effectively remove sulfur in steel, which is the other method and the practice of steel production in the world. With the development of iron and steel, electric steel increased rate, currently accounts for about 30% of world steel production. Especially with the continuous casting and rolling circuit for establishing furnace short process characteristics, the electric furnace steel has been greatly developed. The new development of electric furnace in recent years of the world are super power electric furnace, DC circuit, double shell electric furnace, electric furnace and vertical furnace. With the development of secondary refining technology, electric furnace as the beginning of training features more prominent. Combined with super - furnace refining furnace for smelting furnace, the cycle greatly shortened production the pace of the trend of production efficiency is greatly improved. ( Discussion on small direct current ladle furnace for refining outside furnace Sixth Libraries A ladle furnace for ladle refining; discussion on Dalian special steel; Wu Anmin Yang Wenjun; unknown 19