第6章 建筑二维图形的(国外英文资料).docVIP

第6章 建筑二维图形的(国外英文资料) This article contributed by the ice storm scalpel Ppt documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. The sixth chapter is the basic drawing method of building two-dimensional graphics The building drawing is composed of a large number of basic graphics. AutoCAD 2008 provides accurate methods for drawing basic graphics, such as drawing straight lines, circles, regular polygons and other graphics. The shapes of the two-dimensional figures are simple and easy to draw. But they are the basis for drawing architectural drawings with AutoCAD. Only by mastering their rendering methods and techniques can they better draw architectural graphics. This chapter mainly introduces the commands of drawing basic graphic entities and their application in architectural drawing. 6.1 straight line drawing building axis and frame frame A line is the basic element of a graph. Most of the lines in a building drawing are drawn by straight lines, such as locating axes, walls, pipelines, etc.. This section will explain how to use the command line drawing building axis positioning and A3 frame frame. 6.1.1 draw the axis of the building plan Draw the A axis and the 1 axis of the floor plan of the villa, as shown in figure 6.1. Create a new layer of axis, choose green color, line type, select CENTER, and set the axis layer as the current layer. 6.1.2 drawing frame frame ?????? The drawings and general provisions on the construction drawing frame size in the third chapter of this book. This section is in accordance with the said frame size, frame A3 frame with straight line drawing commands, the specific steps are as follows. (1) type L at the command line, and press the Enter button to start the line command. (2) AutoCAD prompt LINE specifies the first point: in the drawing area, click pick at any point. (3) the AutoCAD prompt specifies the next point, or [U]], by pressing the