聚丙烯-PP(国外英文资料).docVIP

聚丙烯-PP(国外英文资料) Polypropylene -PP The -PP series of polypropylene are obtained by the polymerization of propylene catalyzed by Ziegler - Sodium catalyst, which is a regular crystalline polymer with a regular arrangement of chains. Polymerization process production methods are: solvent polymerization, liquid phase polymerization, gas phase polymerization and solution polymerization of 4 kinds. But mainly solvent polymerization, its regulation in more than 95%, the molecular weight of about 8-15. Properties of polypropylene -PC: Physical properties polypropylene is a non-toxic, odorless, tasteless, milky crystalline polymer with a density of only 0.90-0.91g/cm3. It is one of the lightest varieties of all plastics. It is particularly stable in water. In water, 24H has a water absorption rate of only 0.01% and a molecular weight of about 8-15. The formability is good, but because of the large shrinkage (1%~2.5%), the thick wall products are late sag, and some parts with higher dimensional precision are difficult to meet the requirements. The surface of the product is good and easy to be painted. The mechanical properties, crystallinity of polypropylene, regular structure, so it has excellent mechanical properties, yield, tensile, compressive strength and hardness and elasticity are higher than HDPE, but at high temperature and low temperature, the molecular structure of warping is high, so the impact strength is poor, the molecular weight increases, impact strength also increases, but the processing performance difference. Have outstanding polypropylene bending without signs of damage, its wear-resisting performance is good, can withstand the folding 7*77 opening and closing of the bending damage traces, its wear resistance is also good, dry friction coefficient and nylon are similar, but in oil lubrication, the friction performance is obviously better than nylon, PP can only be used to make low PV value and impact load of gears and bearings. In terms of surface effects