南京物联传感技术有限公司智能家居层别墅方案.doc

南京物联传感技术有限公司-智能家居4层别墅 项目面积：500平方米 产品功能：灯光控制、红外入侵探测、报警联动 系统功能简述：实现对全宅灯光的智能管理，可以用遥控等多种智能控制方式实现对全宅灯光的遥控开关，可根据需要开启各种模式，从而达到智能照明的节能、环保、舒适、方便的功能。并与红外入侵参测器形成联动，自动报警，以确保家中财产安全。 ? 智能灯光 实现对全宅灯光的智能管理，可以用遥控等多种智能控制方式实现对全宅灯光的遥控开关，调光，（区域）全开全关及“会客、影院”等多种一键式灯光场景效果的实现；并可用定时控制、手机远程控制等多种控制方式实现功能，从而达到智能照明的节能、环保、舒适、方便的功能。 ? 红外入侵探测?? 联动报警 考虑主人经常外出，家里安全问题至关重要。我们设计红外入侵联动报警的方案：不管什么时候从别墅的任何出入口（包括门窗），有非法入侵，系统均会自动发出报警声，并第一时间发送报警信息至主人手机上，确保家中财产的安全。 ? the same direction of rotation 90 ° or 180 ° for; after each disc rotor when measuring position alignment of the two half coupling constant, should also be in terms of accuracy and consistency. Surface deviation measurement, must in every 180 degrees corresponding to the two radii are equal to each other in order to eliminate errors caused by movement of the rotor. Only a support bearing of the rotor, WA couplings, such as the use of temporary leave the Center, should pay attention to keep the rotor in the measuring process in the center of the bearing oil retaining the nest does not change. Steam oil block, there should be sufficient clearance between the rotor and, in rotors make sure rotor is not on the block or seal oil. At the time of measurement, connections are not allowed between two rotors, each in a free State. Not allowed in case of assembled sleeve, Center work on the toothed coupling. Coupling tool should have adequate stiffness, installation must be secure and reliable. Coupling Center using a dial indicator, the table should be put in prison and avoid touching, to ensure correct measurement. Coupling disc after a week to return to the original position, circumference of dial gauge reading should be able to go back to the original value. When measuring the clearance of end, into the feeler of the gap should not exceed four at a time, when the gap is too large, you can use the gasket with the feeler gauge measurement of gauge blocks or finishing. bearing surface, markup should be in accordance with the mounting support pads, and r