上海中海洋山国际集装箱储运有限公司成衣质检业务QC.doc

上海中海洋山国际集装箱储运有限公司质检业务（QC） 公司简介： 上海中海洋山国际集装箱储运有限公司（简称洋山储运）为中海集装箱运输股份有限公司全资子公司，位于浦东新区临港物流园区内，占地197亩，总投资2.39亿人民币。公司目前拥有集装箱堆场约60000平方米，包括重箱堆场20000平方米；空箱堆场40000平方米；冷箱插座80只； CFS 仓库20000平方米(层高9米)；办公楼4050平方米；修箱、机修车间等3000平方米；同时还拥有加油站、变电站等完善的配套设施。公司遵循“多功能现代化集装箱和货物公共物流集散中心”的定位，主要经营集装箱装卸、堆存、集装箱国际中转、集装箱拆拼箱、冷藏集装箱预冷、预检；集装箱改装、修理、旧箱翻新、清洗；国内进出口货物中转、集装箱多式联运和仓储、商业性加工、货物国际代理、货物分拨、物流配送等业务；货物的装卸、加工、包装及相关的咨询服务；集装箱租赁，自有仓库出租；集装箱的陆路运输；集装箱货运代理船代货代、报关报检、运输、金融、保险、商检、动植检等业务。Massimodutti等国际知名品牌建立过良好的合作关系，通过对这些国际品牌的实际操作，积累了大量的经验及培养了一批专业的业务人员。在质检的同时还对报关、海运、空运、内装等作一站式服务，为客户节约物流成本。 竭诚欢迎广大新老客户前来参观、指导、洽谈！ 联系人：徐钢 电话：021手机邮箱：xugang@ 地址：上海市浦东新区临港物流园区千祥路99号 （布卷操作流程） （挂衣操作流程） （箱货操作流程） 现场图片： 成衣质检车间 安全干净的成衣储存区域 验布机 布卷货架 the same direction of rotation 90 ° or 180 ° for; after each disc rotor when measuring position alignment of the two half coupling constant, should also be in terms of accuracy and consistency. Surface deviation measurement, must in every 180 degrees corresponding to the two radii are equal to each other in order to eliminate errors caused by movement of the rotor. Only a support bearing of the rotor, WA couplings, such as the use of temporary leave the Center, should pay attention to keep the rotor in the measuring process in the center of the bearing oil retaining the nest does not change. Steam oil block, there should be sufficient clearance between the rotor and, in rotors make sure rotor is not on the block or seal oil. At the time of measurement, connections are not allowed between two rotors, each in a free State. Not allowed in case of assembled sleeve, Center work on the toothed coupling. Coupling tool should have adequate stiffness, installation must be secure and reliable. Coupling Center using a dial indicator, the table should be put in prison and avoid touching, to ensure correct measurement. Coupling disc after a week to return to the original position, circumference of dial gauge reading should be able to go back to the original value. When meas