DUMA气刀在鞍钢热镀锌生产线上的应用.pdfVIP

钢技术 2017 年第2 期 ANGANG TECHNOLOGY 总第404 期 DUMA 气刀在鞍钢热镀锌生产线上的应用 1 2 1 3 1 3 秦大伟 卢长英 张岩 费静 曹中华 李志锋 1. 鞍钢未来钢铁研究院,辽宁鞍山 114031 ； 2. 辽宁银恒镀锌彩涂钢板有限公司, 辽宁鞍山 114012 ； 3. 钢集团钢铁研究院,辽宁鞍山 114009) 摘要 结合 DUMA 气刀在鞍钢热镀锌生产线上的应用实践,详细介绍了气刀结构、功能 及工作原理,包 气腔结构、喷嘴调节、定位装置、供气回路、沉没辊预热炉及镀层厚度控制等。 对气刀设备在鞍钢热镀锌板生产中发挥的作用进行了阐述。 关键词： 热镀锌线；气刀；DUMA;径向控制器 中图分类号 TG335 文献标识码 A 文章编号 1006-4613(2017 )02-0055-04 Application of DUMA Air Wiper on Continuous Hot-dip Galvanizing Line in Ansteel Qin Dawei1 2 1 3 1 3 , Lu Changying , Zhang Yan , Fei J ing , Cao Zhonghua , Li Zhifeng ( 1. Future Ⅰron Steel Research Institute of Ansteel Group Corporation, Anshan 114031, Liaoning, China; 2. Yinheng Galvanizing Color Coated Steel Sheet Co. Ltd., Anshan 114012, Liaoning, China; 3. Iron Steel Research Institutes of Ansteel Group Corporation, Anshan 114009 Liaoning, China） Abstract: Based on the operating practice of the DUMA air wiper applied on the hot -dip galvanizing production line in Ansteel, the structure of the air wiper and its function and operating principle were introduced in detail, including the structure of air chamber, the cut -out governing device, the positioning device, the gas supply loop system, the preheating furnace for sink rolls and control unit for coating weight. And also the function of the air wiper applied the hot dip galvanizing production line in Ansteel was discussed. Key words: hot-dip galvanizing line; air wiper; DU