基于有限元法的加筋板耦合损耗因子计算.pdf

2006 年用户年会论文 基于有限元法的加筋板耦合损耗因子计算 [周平 赵德有] [大连理工大学船舶工程系，116024] [ 摘 要 ] 加筋板是船舶结构中的典型构件之一，本文采用有限元法来计算其连接处的耦合损耗因子。分 别依次激励各个子系统，通过有限元程序 ANSYS 计算出随机分布的输入和输出点处位移响应 值。各个子系统的输入功率由输入点处的导纳计算而得，而各个子系统的平均振动能量则由空 间平均的圴方位移求得。经过所选分析频带内的平均便可得到空间频域内平均的能量和输入功 率，再根据功率流平衡方程即可获得连接处的耦合损耗因子。具体计算过程通过 ANSYS 的后 处理来实现。最终计算结果与实测结果进行比较。 [ 关键词 ] 加筋板；耦合损耗因子；有限元 Analysis for Coupling Loss Factor of Stiffened Plate by Finite Element Method [ZHOU Ping, ZHAO Deyou] [Department of Naval Architecture, Dalian University of Technology, 116024] [ Abstract ] The stiffened plate is a typical structure of ship decks and trunk bulkheads. In this paper the coupling loss factor of this structure is determined by finite element method. To calculate coupling loss factor, power is injected into every subsystem in turn and the displacement responses of random input and output points are calculated by finite element method program ANSYS. The input power is derived from input point mobility and the average energies of every subsystem are obtained from the squared and spatially averaged displacements in a frequency band. By inverting the appropriate calculated energy matrix, the coupling loss factors can be obtained. These operations are done in a postprocessor of ANSYS. Finally the computational results are compared with those obtained from experiments. [ Keyword ] Stiffened Plate; Coupling Loss Factor; Finite Element Method 2006 年用户年会论文 1 前言 [1] 统计能量分析（Statistical energy analysis）方法 是目前工程领域中求解结构