8水性漆底色漆系统.PPT

Why is it simple?为什么方便？ Easy mixing- no additives or activators调色方便—不加添加剂或活化剂 Easy application- just add thinner施工方便— 只加稀释剂 Easy fade out- no special process驳口方便—没有特殊的工艺 The Aquabase Plus Products 产品 Aquabase Plus Products 产品 Aquabase Plus Viscosity 施工粘度 Preparation 前处理 Process Options 工艺选择 Aquabase Plus Option 1 方法4 Aquabase Plus Option 2 方法2 Aquabase Plus Option 3 方法3 Aquabase Plus Option 4 方法4 Substrates 底材 * Aquabase Plus Waterborne Basecoat 水性底色漆 Module Name PTA_CAR_707_Aquabase Plus Basecoat_1205_EM Module Number PTA_CAR_707 The simple way to compliance…….符合……环境保护法则 Easy mixing调色方便 Easy application: “Thin and spray”施工容易：“稀释-喷涂” Easy fade out便于做驳口 Aquabase Plus mixing basics: Aquabase Plus 调色色母 P990/992 Pigmented着色色母 P989-Line P995/996/999 Pearl/Effect 珍珠/侧色效果色母 P991/993 Special Pigmented特殊颜料色母 P998 Aluminium 银粉色母 Tone Controller 控色剂 P998-8991 Clear Adjuster 清漆调节剂 P990-8999 Precleaner 除油剂 P980-8252 Aquabase Plus Thinners 稀释剂 P980-5000 Standard 标准 P980-5050 Slow 慢干 Flocculating Agent 絮凝剂 P872-1000 Aquabase Plus Colour Recipes 色漆调配 Quick and easy to mix调色方便快捷 No additives and no activators不必加添加剂或活化剂 Just add thinner and ready to spray只加稀释剂就可以喷涂 P989-colour 色母 100 parts by weight 重量比 P980-5000/5050 thinner 稀释剂 20 parts by weight Do not mix colour in metal containers! 不能用金属容器调色！ Stir thoroughly by hand 手工搅拌均匀 Optimum paint temperature range: 20-25°C 最佳施工温度范围： 20-25°C Basecoat Mixing Ratio 色漆调配比例 For maximum opacity 10% thinner may be used if needed为了达到最佳遮盖力，需要时可以加10% 稀释剂 At high temperatures (30°C) 30% thinner may help application and overspray absorption高温时(30°C) ，可以加 30%稀释剂，便于施工和溶化漆雾 Basecoat Mixing Ratio 色漆调配比例 It is necessary to control viscosity to give best balance ofapplication, flow, metal control and colour必须控制粘度，达到喷涂、流平、 银粉控制和颜色的平衡Lower viscosity (23-27 secs) will give better application properties, laydown and appearance. It may also improve drying times粘度较低