手机内存清理方法.doc.doc

步骤一： 打开Re管理器，依次打开路径：/data/dalvik-cache。 ?找到data文件夹 ?打开data，找到dalvik-cache文件夹 2. 将/data/dalvik-cache移动到/cache /data/文件目录下，或者直接把dalvik-cache文件夹删除。推荐直接删除，省事。 ?进入dalvik-cache可以看到有好多的垃圾文件 ?可以将dalvik-cache移动到/cache /data/文件目录下，或者直接删除 步骤二： 打开re管理器，依次打开路径/data/local/，你会看到rights和tmp这两个文件夹（有的可能没有rights这个文件夹，不过没关系）。打开tmp文件夹， 你可以看到以前安装失败，或者是安装的途中重启后失败的垃圾软件游戏都可以在这里找到。我们只要将它们统统的删除就可以啦。然后重启手机，椒友们就能发现，自己手机的内存比之前的多了好多。 ?依次打开路径/data/local/ ?打开tmp文件夹 ?将安装失败的软件文件删除 最后，重启手机。（友情提示：删除后垃圾软件之后，第一次重启手机时，开机的时间会比较久，请各位椒友耐心等待） 重启之后，一下子为自己的手机增加了近120M的手机内存，手机的运行速度也比之前快了哦。 怎么样？凌少推荐的方法是不是非常简单？基本上没有什么难度的。只要找对文件夹，然后将垃圾文件删除就可以了。操作虽然简单，但是效果却非常的好。这对于经常安装软件游戏的安卓椒友来说，绝对可以节省去一大块手机空间来。 the same direction of rotation 90 ° or 180 ° for; after each disc rotor when measuring position alignment of the two half coupling constant, should also be in terms of accuracy and consistency. Surface deviation measurement, must in every 180 degrees corresponding to the two radii are equal to each other in order to eliminate errors caused by movement of the rotor. Only a support bearing of the rotor, WA couplings, such as the use of temporary leave the Center, should pay attention to keep the rotor in the measuring process in the center of the bearing oil retaining the nest does not change. Steam oil block, there should be sufficient clearance between the rotor and, in rotors make sure rotor is not on the block or seal oil. At the time of measurement, connections are not allowed between two rotors, each in a free State. Not allowed in case of assembled sleeve, Center work on the toothed coupling. Coupling tool should have adequate stiffness, installation must be secure and reliable. Coupling Center using a dial indicator, the table should be put in prison and avoid touching, to ensure correct measurement. Coupling disc after a week to return to the original position, circumference of dial gauge reading should be able to go back to the original value. When measuring the clearance of end, into the feeler of the ga