喷塑涂层厚度对散热器散热量影响的实验研究.pdfVIP

25 2 建 筑 科 学 Vol1 25, No1 2 2009 2 BUILDING CIENCE Feb. 2009 [ ] 1002-8528(2009) 02-0064-04 潘持玺, 张双喜, 刘 杰, 张译文( 青岛理工大学 环境与市政工程学院, 山东 青岛 266033) [ ] , , , , ; , , , [ ] ; ; ; + [ ] TU83212 3 [ ] A Experimental tudy on Influences of Coating Thickness on Radiator Heat Dissipation Capacity PAN Chi-xi, ZHANGShuang-xi,LIUJie, ZHANG Yi-wen( Institute of Environment unicipal Engineering, QingdaoTechnological University, Qingdao 266033, Shandong , China) [Abstract] In order to determine the influences of outer surface spray coating thickness on radiator heat dissipation capacity, the total heat dissipation capacities of the elliptical tube bathroom radiator coating under different coating thicknesses were measured according to the national standards. And then, the heat dissipation capacities under different temperature differences and place states were compared and analyzed.The results indicated that the influences of surface coating thickness on heat dissipation capacity under vertical state was small but very obvious under horizontal state. Moreover, the heat dissipation capacity was changed in the forms of two curves with the surface coating thickness, and a best coating thickness for better heat exchange was existed. [Keywords] elliptical tube bathroom radiator, heat dissipation capacity, coating thickness, place state 0 , , , , , , 1 , , , , 5 , 6( GBPT 13754- 1992) [ 1] ,