UV固化涂料汇编.docxVIP

毕 业 论 文题 目：PC底材用UV固化真空镀膜面漆的制备学 院：轻化工程学院专 业：材料科学与工程学生姓名：肖又山学 号：1204100007年级：2012级指导教师：李萌崛完成时间：2016年4月28日目录摘要1关键词1Abstract,1Key words20 前言21 材料与方法31.1 实验药品31.2 主要仪器和设备31.3实验原理31.3.4 真空蒸镀铝膜原理：41.4 实验过程41.4.1 面漆的配置51.4.2 PC底材的处理51.4.3 喷涂51.4.4 UV光固化51.4.5 真空镀膜51.4.6 附着力测定51.4.7 盐水浸泡24小时进行耐盐水行的测定。62 结果与分析62.1 镀膜面漆的四种参考配方62.2 稀释剂，光引发剂对面漆性能的影响83 结论8参考文献9致谢10独撰声明11PC底材用UV固化真空镀膜面漆的制备作者：肖又山指导教师：李萌崛（2016届材料科学与工程专业）摘 要：PC底材性价比高，日常应用广泛，但是在注塑过程中往往存在缺陷。UV固化是指利用紫外光热量将小分子交联为大分子的过程。真空镀膜能使非金属材料表面金属化。本次实验通过对四个已知配方在实验条件下反复进行实验通过对实验成果的性能检测，选出性能最佳的面漆从而在已知配方中选取较好的配方。在选取出的配方二中进行改变低聚物、单体、引发剂、稀释剂来获得更好的配方。实验结果表明配方2—2低聚物（6145-100，DR-U168）低聚物占重量的31.25%，单体（EM231，EM210）占重量的16.01%，活性稀释剂（TPGDA，DPHA）占重量4.5%，稀释剂（甲苯，醋酸乙酯，异丙醇）占重量的53.9%，光引发剂（1173）占重量的2.57%为最佳配方制备出的面漆性能优良。关键词：UV固化真空镀膜面漆制备PC substrate with UV curing vacuum coating paint Preparation ofAuthor: Xiao YouShan Tutor: LiMeng Jue(2016 materials science and Engineering)Abstract: PC polycarbonate is in the molecular chain containing carbonate based polymer, according to the structure of ester can be divided into aliphatic aromatic and other types. UV curing refers to the process of using ultraviolet light to cross the small molecules to cross the molecules. Vacuum coating can make the surface metallization of non metallic materials. This experiment by of four known formula under the experimental conditions of repeated experiment through the performance testing of experimental results, elected best performance topcoat toknown formulation selected good formula. In the selection of the formula to change the composition of the monomer, monomer, initiator, diluent to get a better formula. Experimental results show that the formula 2 - 2 oligomers (6145-100, 31.25% DR-U168) oligomer for weight, 16.01% monomer (EM231, em210) accounting for the weight of and active diluent (TPGDA,dpha) accounted for 4.5% of the weight of the diluent (toluene, ethyl acetate, 53.9% isopropyl alcohol accounted for weight, light induced agent (