塑件缺陷分析(刘新发)概要1.pptVIP

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 震雄捷霸JM268MKIII-C注塑机具备最大射胶压力147Mpa 以及锁模力268公吨，对须要122MPa射胶压力以及251 公吨锁模力的4型腔看台杯模子，足堪胜任。 Chen Hsong JETMASTERJM268MKIII-C, with maximum injection pressure of 147 Mpa and clamping force of 268 ton (m), is OK to work on this 4 cavity stadium cup mold which needs a injection pressure of 122MPa and a Clamping force of 251 ton (m). 4型腔看台杯模4 Cav. Stadium Cup Mold 是否能以0.1秒这么短的射出时间充模？ 以射胶速率而言，577克/秒[50x(1.05/0.91)/0.1]超过机器(震雄捷霸JM268III-C)的上限225克/秒。