消失模铸造存在的技术问题(国外英文资料).docVIP

消失模铸造存在的技术问题Problems in lost foam casting / Countermeasures2009-3-25 23:15:00EPC process and products with good appearance quality, high precision, low labor intensity and good working environment in China foundry industry has been used well, especially in recent years, domestic manufacturers and technical personnel continue to develop in the raw materials and process equipment, the process of the basic realization of localization, and further promote the EPC Process, the development of technology.The name and type of casting or EPC casting, intuitively namely: foam model embedded in dry sand vacuum formed casting iron liquid injection, of course to good use of this technology to produce excellent products, should also be good to handle the following problems.Study on forming principle of cut and lost foam casting1. basic requirements for forming of EPC in dry sandPyrolysis characteristics of 2. foam model3., dry sand, lost foam casting, molding sand filling and compaction characteristics4. filling and replacement of liquid metal by dry sand lost foam casting5. dry sand; lost foam casting; casting; solidification characteristics6. cooling characteristics of foundry castings with dry sand and their effects on microstructure, properties and residual stresses of cast ironTwo. Development of common technology for EPC process of dry sand1. design and manufacturing technology of foam mould for EPC(1) the function, requirement and manufacturing process of foaming mould;(2) design of foam model (block)(3) design of foaming mould (mould type, module number, module parting surface, structure design, cavity design, vent hole, feeding port, die making mechanism, positioning)(4) foam mold processing;(5) die assembly adjustment;(6) test die for foaming mould;(7) the rapid manufacture of foaming mould2. manufacturing technology of EPC foam plastics model(1) model properties and selection of raw materials(2) foaming technology(3) curing technology(4) die forming technology;3. coati