CS1.6如何在控制台优化FPS(国外英文).docVIP

CS1.6如何在控制台优化FPS(国外英文资料) Optimize specific steps: 1, first set the display refresh rate, generally 75 is more appropriate. 2, optimize the video card, find the OpenGL settings. Vertical sync is set to close. 3, enter the cstrike directory, delete the config.cfg and autoexec.cfg files. 4, go to CS and restore the default settings. Enter the game and call up the console. Enter fps_max 100 5, quit the game. Then remove the shortcut -console into the game. Just look at the fps. Note: in the case of consoles, FPS will be reduced. Make sure there are no viruses in the machine at the same time. Everyone knows the importance of FPs in cs. Most people should have tnt2 or more graphics cards (I have only one tnt2 pro on my hands, none else, so I havent tried). Here I have two steps to illustrate the optimization steps. The first step: the optimization of the hardware graphics card, first of all, go to the next new detonator drive, recommend 14. The 10 edition, the driver of the memory card and a small core speed overclocking, ensure the CS FPS ultra stable, much as you do. Advanced in the first advanced display attribute, and the internal adapter has a refresh rate. Just how large the monitor will allow. Because the CS of FPS is no more than the refresh rate of the monitor. Your FPS has been 85, probably for this reason. Secondly, in the display properties - advanced there is a Riva tnt2 pro, which has an additional property, the D3D set and OpenGL set in the hook all removed, the vertical sync settings in the OpenGL off, finally, if you still feel not enough, is not allergic (like I), only this super graphics, BIOS brush graphics cards BIOS famous brand, or to brush a high grade BIOS (I saw an article that is put into MX 400 mx200 brush, I put my not brand tnt2 Pro brush into Leadtek S320 ultra). The memory speed and core speed all over it, so that the hardware will be finished. The second step: the game is set on this information a lot, I just brought up, made a autoexec.c