Tssd(国外英文).docVIP

Tssd(国外英文资料) You can mark multiple axis numbers on a single axis and have a variety of styles available. The 5. column Modify the moving column, increase the number of columns, automatic and beam Qi function. 6. beam 1) modify the beam header, increase the tagging result, display the edit bar, and interact with the edit box. 2) changed Liang Kuan, added the Liang Kuan function in the graph. 7. wall 1) modify the hole on the wall and increase the dimension of the hole. 2) modify the copy hole and increase the capture. 8. foundation cap layout 1) modify the pile under the wall, you can cross the pile at the wall crossing. 2) the basis of the plane layout and the cap is increased by only one option. 9.TS component 1) the elevation of the beam is increased, and the multi span, multi section and various types of support can be drawn, and the beam section can be automatically generated. 2) modify the cross section of the beam and modify the judgment condition of the waist bar. 3) modify the plate staircase, increase the mirror image function, and press the staircase standard 03G101 - 2 to modify the reinforcement. 4) modify the beam staircase, increasing the mirror image function. 5) modified beam biprism foundation, increase beam waist reinforcement drawing. 10. steel and reinforced tools 1) modify the steel mark, and label the eight styles. 2) increased the range of steel mark function. 3) modify the freehand bars and increase the indent options. 4) modify the drawing point steel, increase the arc, multi-point cloth. 5) the direction of the hook is increased, and the direction of the hook can be changed. 6) an extension of 135 degrees; the editing of the pull hook can be interchanged with the straight stretch bar hook. 7) modify the reinforced pull through, can be reinforced text merge. 11. dimension marking 1) increasing the interchangeability of angle tagging and arc length tagging. 2) increase the diameter of the arc mark. 3) increase is the original value check func