发电机的试验要求(国外英文).docVIP

发电机的试验要求(国外英文资料) 4 test instrument sensor 4.1 sensor test instrument using the instrument sensor by measuring Department inspection and within the validity period, the provisions in accordance with the relevant standards and testing requirements of the testing scope, the sensor accuracy should be the instrument, instrument sensor accuracy should be not less than 0.2. The instrumentation used 4.2 test instrument, shall be approved by the Metrology Department qualified certification and within the period of validity, test range, instrument used for the test accuracy shall meet the requirements of the relevant standards and testing requirements. During the test, electrical measuring instrument and meter the accuracy should not be less than 0.5 (megameter except), resistance measurement accuracy should not be less than 0.2, torque measuring instrument accuracy should not be less than 0.5, the tachometer accuracy should not be less than 1, the quasi 2 NB/T dynamometer xxxx.2 - * * * * accuracy should not be less than 1 (excluding hanging spring scale), soil thermometer error is not more than l DEG C. 4.3 test preparation, test equipment and wiring shall meet the requirements of the test. Before the test, the generator shall be in the normal state, the wiring is correct, and the assembly and operation of the generator shall be checked to ensure that the tests can be carried out smoothly. 4.4 safety measures should be taken for safety precautions in all tests as the test involves dangerous current, voltage, and mechanical forces. All tests shall be performed by personnel with relevant knowledge and experience. 5 test items 5.1 winding insulation resistance measuring 5.1.1 on Determination of 5.1.1.1 measurement between casing and winding insulation resistance when measuring insulation resistance of the motor when the motor winding state should be in the actual motor cold state and thermal state (or temperature rise under test). When checking the test, if there is no other