Cimatron13中英文对照.docxVIP

SIINGLE POINT单一点MULTI-POINT多点MULTI-POINT多点2 POINT两点PARALLEL平行OFFSET补正PT-ANGLE点-角度PT-CURVE点-曲线LN-CURVE直线-曲线2 CURVES两曲线HOR/VER水平/垂直BOX矩形DIVID-LN等分线SURF-TAN曲面-切线SURF-NRM曲面-法线TAN/NORM切线/法线2 PLANES两平面交线CENTER+RADIUS/DIAM 圆心+半径/直径CENTER+POINT圆心+圆上之点2 POINTS两点+半径3 POINTS通过三点POINT+CURVE（RAD）点+曲线（半径）POINT+CURVE（PT）点+曲线（点）2 CURVES切两曲线+半径3 CURVES切三曲线POINT+2CURVES点+两曲线2 POINTS+CURVE两点+曲线RADIUS半径CHAMFER斜角MULTI RADIUS多重倒角CORNER尖角TRIM BY CURVE 依曲线修剪TRIM BY POINT 依点修剪TRIM BY PLANE 依平面修剪DIVIDE BY CURVES 依曲线分割DIVIDE BY POINT 依点分割CURVE曲线CONTIUR轮廓3D OFFSET补正SURFACE曲面MULTI-SURFACE多曲面SURFACE COMTOUR 曲面轮廓LINEAR SWEEP线性扫掠ANGULAR SWEEP角度扫掠BOUNDING BOX方框选取2D SPLINE二维曲线3D SPLINE三维曲线ELLIPSE椭圆ENDSSHLDR PT端点。肩点ENDSP/Q端点。P/QPROJECT POINTPROJECT CURVESPNTPROJECT COMTOURPOINT-ANGLE点-角度DELTA偏移值ROT.AXIS轴旋转REF.POINT参考点MIRROR镜射UCS TO UCS UCS 到 UCSCREATE建立DELETE删除RENAME改名GROUP群组EXIRACT SUB-ASSY 选取子装配EXIRACT CATALOG 选取外部群组EXPORT CATSLOG输出外部群组APPEND SUB-ASSY 附加子装配IMPORT CATSLOG输入外部群组IMPORT LEVELS输入外部层EXPORT LEVELS输出层LINEAR线性ANGULAR角度RADIAL半径DIAMETER直径DIM-PAR 设定参数DIM-EDIT修改参数CREATR建立DELETE删除RENAME更名CREATE建立EXPLODE炸开FIXED固定式LINEAR线性式EXPONENTIAL指数式CURVES曲线PLANAR FACES直平面PARALLEL SEC平行截面PIPE圆管SPINE导向SPINEPLANE导向平面SPINEEDGES导向线两边线TWO SPINES双导向线TWO CURVES两条曲线TWO CONTOURS两轮廓CURVE SURFACE曲线对曲面CURVE PLSNE曲线对平面CURVE POINT曲线对点2 SURFACE两曲面3 SURFACES三曲面3 DIE.RADII三曲面不同半径BASE-MULTI基准面-多曲面MULTI-MULTI多曲面多曲面CURVE SURFACE曲线对曲面SPINE+2SRF导向+两曲面SPINE+3SRF导向+三曲面SECTIONS断面CORNER角落SOAP皂形曲面REGION衔接区域PLANE平面SURFACE曲面CURVE曲线非修剪曲面时菜单DISPLAY CURVES 显示曲线BOUNDARY CURVE边界线修剪时菜单DISPLAY CURVE目前显示线BY INDI CATION依指定SINGLR CURVE单一曲线直平面时菜单ALL CURVES所有曲线PLSNE平面SURFACE曲面UV ARAMETERUV参数CONTOURS轮廓ORIGINAL恢复原始EDIT CINTOURS编辑轮廓MIDIFY BOUNDARY 编辑边界FIX BOUNDARY修复边界DELTA偏移值REF.POINT参考点ADD ISLAND增加岛屿REPLACE OUT CONTR 取代外部轮廓REPLACE ALL全部取代FAIR平缓化LICAL FAIR局部平缓化MODIFY POINTS编辑控制点MODIFY SLOPES编辑斜率CREATE POINTS建立点SURFACE EXTENSION 曲面延伸PLFACE TO TRMSRF 直平面到修剪曲面TRMSRF TO SUR