2012最新智能防盗防火及照明控制系统的实现(外国英语资料).docVIP

2012最新智能防盗防火及照明控制系统的实现 With the rapid economic development and social progress, people travel and work outside the time gradually increased, the empty home, shopping malls, room or laboratory and other public places, the most worrying is the possible security issues, such as whether there will be a thief broke into the house, is not because of a variety of power lines caused by long time use of fire and so on; and now the vast majority of lamps in use is by manual operation, especially when we arrived home at midnight touch switch, when the light is insufficient or manually on the stairs turn on the light, it will bring us a lot of inconvenience. In addition, often due to staff negligence, after people left, forget to shut down equipment and lead to waste of electricity. In order to solve the above problems in the design of this system, consider using MCU as the main controller, using pyroelectric infrared body module, temperature sensor and photosensitive diode respectively to detect any indoor personnel and the indoor temperature, so as to control the opening degree of the indoor lighting brightness, and when the temperature of Primeline timely alarm function, overall design an intelligent fire alarm and lighting control systems, real-time regulation and control of indoor lighting lighting, intelligent control and energy saving, so as to achieve the purpose of fire prevention security. 1 principles and design 1.1 system overall design In the design of this system, using MCU as the main controller, the pyroelectric infrared body and temperature sensing system to detect any indoor personnel and the indoor temperature, design an intelligent fire alarm control system, in addition to the photosensitive diode to detect indoor illumination intensity, regulation and control of indoor lighting lighting in real-time, so as to achieve intelligent control and energy saving. According to the system design requirements and taking into account the feasibility of the system, the