灌砂法检测路基压实度技术要点(外国英语资料).docVIP

灌砂法检测路基压实度技术要点 2009-7-27 13:42 [large, medium and small] [Print] Abstract: the most economical and effective technical measure to ensure subgrade strength and stability is subgrade compaction, and the quality of subgrade compaction is usually measured by the degree of compaction. Subgrade compaction test method for cutting ring, sand filling method, density method, and the sand filling method is the most commonly used test methods for the detection of subgrade compaction, it is suitable for field measurement of fine grained soil, sand soil and gravel soil density. According to the degree of compaction of subgrade engineering testing experience, considering the various factors influencing sand compaction detecting accuracy, analyzes on how to ensure the accuracy of detection of subgrade compaction sand filling method and discussion. Key words: sand filling method; inspection; subgrade; maximum density; water content I. overview of subgrade inspection methods One of the most economical and effective technical measures to ensure subgrade strength and stability is subgrade compaction, and the quality of subgrade compaction is usually measured by degree of compaction. Subgrade compaction test method for cutting ring, sand filling method, density method, and the sand filling method is the most commonly used test methods for the detection of subgrade compaction, it is suitable for field measurement of fine grained soil, sand soil and gravel soil density. Although sand filling method is easy to learn, there are many factors that influence the test result. If it is not well controlled, it will lead to greater errors or errors. How to ensure the accuracy of sand filling method to detect subgrade compactness, Based on the experience of several roads in recent years, the author analyzes and probes into this aspect. Two. Determination of the maximum dry density of soil The degree of compaction is that the soil reaches the maximum dry density after compaction, and the compaction