光电鼠标工作原理(外国英语资料).docVIP

光电鼠标工作原理 G gate and drain D and source s, respectively in the common base of the transistor, the collector and emitter of the corresponding. 2. phototransistor 3. The thyristor is silicon crystal thyratron as early as it can be said to dig silicon, is a new type of power converter for semiconductor devices. Thyristor features Because of the characteristics of the rectifying device, the operation process is controllable, and the high-power signal system can be controlled with a small power signal area, so that the electronic technology can be controlled From the weak areas into the strong field. The working principle of the optical mouse, the mouse in the interior has a light emitting diode, light emitting diode to illuminate the contact surface of the bottom of the mouse, and the contact surface will be reflected back to the part of the light, reflected light through a set of optical lens and imaging in a CMOS sensor. When the mouse moves, moving track will be recorded as a set of high-speed shooting coherent image, and the mouse has a dedicated internal DSP chip for image analysis, a series of images on the moving track of the intake for analysis and processing, based on the feature point position changes on the image analysis, to judge the mouse movement direction and distance, thus completing the cursor position. Photoelectric mouse usually consists of the following parts: optical sensor, optical lens, light-emitting diode, interface microprocessor, light touch button, roller, connection, PS/2 or USB interface, shell and so on. The following are described separately: optical sensor Optical sensors are the core of the photoelectric mouse, and only three companies that can produce optical sensors are Agilent, Microsoft and Logitech at present. Among them, the optical sensor Agilent Co is widely used, in addition to Microsoft and Logitech all optical mouse and other optical mouse are basically using the optical sensor of the Agilent Co. Control chip of photoelectri