icf 实验中的靶材料研究research on the material used in .pdf

CNIC-01673 CAEP-0135 ICF 实验中的靶材料研究 RESEARCH ON THE MATERIAL USED IN THE ICF EXPERIMENTS (In Chinese) 中 国 核 情 报 中 心 China Nuclear Information Centre 94 CNIC-01673 CAEP-0135 ICF 实验中的靶材料研究 张 林 （中国工程物理研究院激光聚变研究中心，绵阳，621900 ） 摘 要 3 利用热诱导相分离技术制备出密度约 1 mg/cm 的超低密度聚 合物泡沫，研究了凝胶、冷冻及干燥条件对泡沫结构的影响；进行 了聚苯乙烯的合成与改性工艺研究，并用 L-B 膜技术和流延法制备 出厚度＜50 nm 的聚合物超薄薄膜；研究了聚苯乙烯泡沫的液体浸 润性能和机械性能，并采用溶液的自由基聚合反应制备了聚丙烯酸 酯泡沫；进行了铜、铁柱腔制备技术的调研工作。 关键词：泡沫 聚合物 薄膜 冷冻靶 柱腔 分类号：TL632.1 95 Research on the Material Used in the ICF Experiments (In Chinese) ZNANG Lin （Center of Laser Fusion Research, CAEP, Mianyang, 621900 ） ABSTRACT Low-density polymer foam with density about 1 mg/cm3 is prepared by thermal-induced phase inverse. The dependence of polymer foam morphology on gelatin, freezing and drying parameters are discussed. Polystyrene is synthesized and modified. The polymer ultra-thin films with PS and modified-PS are produced via the Langmuir-Blodgett and casting method. The liquid wetting property and mechanical property of PS foam are measured. Polyacrylate foam is produced by free radical polymerization. Preparation of copper and iron cylinder are investigated. Key words ：：Foam, Polymer, Thin film, Cryogenic target, Cylinder ：： Category: TL632.1