ATMEL AT93C46D的官方PDF资料.pdfVIP

Features • Low-voltage and Standard-voltage Operation – 1.8 (VCC = 1.8V to 5.5V) • User-selectable Internal Organization – 1K: 128 x 8 or 64 x 16 • Three-wire Serial Interface • 2 MHz Clock Rate (5V) • Self-timed Write Cycle (5 ms max) • High Reliability – Endurance: 1 Million Write Cycles Three-wire – Data Retention: 100 Years Serial • 8-lead JEDEC PDIP, 8-lead JEDEC SOIC, 8-lead Ultra Thin mini-MAP (MLP 2x3), 8-lead TSSOP and 8-ball dBGA2 Packages EEPROM • Die Sales: Wafer Form, Tape and Reel, and Bumped Wafers 1K (128 x 8 or 64 x 16) Description The AT93C46D provides 1024 bits of serial electrically erasable programmable read- only memory (EEPROM), organized as 64 words of 16 bits each (when the ORG pin is AT93C46D connected to VCC), and 128 words of 8 bits each (when the ORG pin is tied to ground). The device is optimized for use in many industrial and commercial applica- tions where low-power and low-voltage operations are essential. The AT93C46D is available in space-saving 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead Ultra Thin mini- MAP (MLP 2x3), 8-lead TSSOP, and 8-lead dBGA2 packages. The AT93C46D is enabled through the Chip Select pin (CS) and accessed via a three-wire serial interface consisting of Data Input (DI), Data Output (DO), and Shift Clock (SK). Upon receiving a Read instruction at DI, the address is decoded and the data is clocked out serially on the DO pin. The Write cycle is completely self-timed, and no separate Erase cycle is required before Write. The Write cycle is only enabled when the part is in the Erase/Write Enable state. When CS is bro