F170填料函式废热锅炉机械设计1.doc

2014届毕业设计说明书 F170填料函式废热锅炉机械设计 院、 部： 机械工程学院 学生姓名： ### 指导教师： ####### 职称 副教授 专 业： 机械设计制造及其自动化 班 级： ######### 完成时间： 2014.5 摘 要 本课题研究的目的主要是针对给定的填料函式换热器设计要求，通过查阅资料、分析设计条件，根据一些基本计算来确定填料函式换热器的结构。 通过分析填料函式换热器的设计条件，确定设计步骤。对填料函式换热器筒体、封头、管板等部件的材料选择、壁厚计算和强度校核。对填料函式换热器前端管箱、后端管箱、传热管和管板等结构进行设计，对换热器进行开孔补强校核。绘制符合设计要求的填料函式换热器的图纸，给出相关的技术要求. 在填料函式换热器的结构设计过程中，要参考相关的标准进行设计，比如GB150、GB151等，使设计能够符合相关标准。同时要使设计的结构满足生产的需要，达到安全生产的要求。 关键词：换热器；填料函式；设计；强度 ABSTRACT The purpose of this research project is for a given fixed tube Stuffing box heat exchanger design requirements, through access to information, analysis and design conditions, based on some basic calculations to determine the fixed tube Stuffing box heat exchanger structure. By analyzing the fixed tube sheet Stuffing box heat exchanger design conditions, determine the design steps. On the fixed tube Stuffing box heat exchanger cylinder, head, tube sheet and other components of the material selection, calculation and strength check of wall thickness. Fixed tube Stuffing box heat exchanger of the front tube box, back-end tube box, heat transfer tube and tube sheet structure of the design, Stuffing box heat exchanger check opening reinforcement. Drawing with the design requirements of the fixed tube sheet Stuffing box heat exchanger drawings, given the relevant technical requirements Fixed tube sheet Stuffing box heat exchanger in the structural design process, to refer to the relevant standards for the design, such as GB150, GB151, so that the design will satisfy the relevant criteria. At the same time make the design of the structure to meet production needs, to safety requirements. Key words Stuffing box heat exchanger; fixed tube sheet; design; strength  目 录 摘 要 I 符号说明 1 1.绪论 2 1.1概念及其意义 2 1.2换热器的特点 2 1.3