Film大屏设计规范(10.1寸以上屏体设计规范2013.1.15)_English_2nd.ppt

Focaltech-Systems Version:V1.0 Design Rules for TP design (Film material =10.1”) Contents @ FocalTech 2013 Confidential Release note 5X26 IC TP Structure TP AA design rules DITO material design rules Outer line placement design rule Channel resistance design rule Electrical and design spec Release note @ FocalTech 2013 Confidential Version Contents Revision data Author V1.0 Preliminary version 2013.01.15 Henry Liu 5X26 IC @ FocalTech 2013 Confidential IC Number of RX Number of TX Supportable size FT5826 48 36 10.1” ≤ size 11.6” FT5926 58 40 11.6”≤size≤12.5” FT5B26 66 44 12.5”size≤14.1” FT5C26 72 48 14.1”size≤15.6” TP structure @ FocalTech 2013 Confidential G+F(DITO) structure diagram G+F+F structure diagram TP AA design rule @ FocalTech 2013 Confidential Design parameter: a ≥0.6mm, b ≥0.6mm, recommendation: 1.5mm,a is distance between TP VA TP AA on X direction, b is distance between TP VA AA on Y direction DITO design（1） @ FocalTech 2013 Confidential Lithography design rules @ FocalTech 2013 Confidential Design parameters: WIN8 certificate: Px≤ 4.75mm,Py≤ 4.75mm, Px is pitch on X direction; Py is pitch on Y direction Non WIN8 certificate: Px=4~6mm,Py=4~6mm, 5mm is recommended. Px is pitch on X direction; Py is pitch on Y direction a=0.4~0.6mm, recommendation: 0.5mm. b=30~60um,b is ITO space gap c=0.15mm. d=(Px/2)+a. e=(Py-4b-2c)/3, e is Dummy ITO height f=(Py-2b)/3, f is Dummy ITO height DITO design rule（2） @ FocalTech 2013 Confidential Design parameters: WIN8 certificate: Px≤ 4.75mm,Py≤ 4.75mm, Px is pitch on X direction; Py is pitch on Y direction Non WIN8 certificate: Px=4~6mm,Py=4~6mm, 5mm is recommended. Px is pitch on X direction; Py is pitch on Y direction b=30~60um,b is ITO space gap r=2.5~4.5mm.3mm is recommended n=(Px-2b)/2. n is Dummy ITO length DITO design rule（3） Lithography design rules @ FocalTech 2013 Confidential Design parameters: WIN8 certificate: Px≤ 4.75mm,Py≤ 4.75mm, Px is pitch on X direction; Py is pitch on Y direction N