FGS应用及相关标准概要1.ppt

FGS Application StandardFGS 应用及相关标准 Principal purpose of the FGSFGS的主要目的 Typical role and function of FGSFGS典型的功能 Overview of the functionality FGSFGS系统功能简介 Considerations for FG ApplicationsFGS系统应用应考虑的内容 Key Points for FG SystemFGS系统的要点 TRICON Three Function Blocks TRICON的三种功能块 Integration with ESD 与ESD系统的综合 Typical International Project 典型国际项目 Three teams for BASF project TRICONEX在扬-巴项目上有三个项目组 HO Cheng Hock, Project manager Mike Huang, Technical manager Team 1, Mr. Liang, Lead engineer Team2, Ms. Wuge, Lead engineer Team3, Mr. Fan, Lead engineer Dedicated Logistic support and documentation group. BASF-YPC International Project - TRICON System扬子－巴斯夫国际项目扬子-TRICON系统 BASF-YPC International Project - AAAESLS Network扬子－巴斯夫国际项目-网络图 * * The protection of personnel 保护人的安全 The protection of environment 保护环境 The protection of equipment, plant and structures 保护设备、装置和建筑 To detect location, nature and conditions of fire and gas hazards at the earliest possible stage. FGS系统可及时发现并判断火灾和毒气的位置和状况 To initiate protective actions. FGS系统对危险可及时采取相应保护措施 To function on demand and as intended and not initiate nuisance events. FGS系统保证采取相应保护措施是准确的,而不是误动作 The system must rapidly and automatically detect, alarm, disconnect non-essential electrical equipment. FGS系统可以快速的自动检测,报警,断开非重要的电子设备 Remove or isolate fuel sources and initiate extinguishing system. FGS系统可以排除或隔离火源并起动灭火系统 To to limit the consequences of a fire and to minimize gas, smoke and leakage to other areas within a certain time. 在一定的时间内,系统可限制火灾或毒气、烟等泄漏而造成危害的扩大 The boundaries normally consist of firewalls, roofs and decks and the divisions are based on the risk they represent. 根据不同的危险程度通常有不同的防护措施如防火墙,顶棚,甲板等 FGS design principle and the criterion followed FGS系统的设计原则及遵循的规范 The criterion must followed when design one FGS accorded with international standard: 符合国际标准的FGS系统设计时应遵循的规范要求： NFPA 72: National Fire Alarm Code EN 54-2 :Fire Detection and Fire Al