最大限度地提高磨机的效率毕业课程设计外文文献翻译.docxVIP

附录AMaximize the efficiency of the millQingfei Xiaoa, * , Huaibin Kanga , Bo Lia, Chunmei LuobAASRI Procedia 7 (2014) 14 – 19Abstract:Optimized study to the ratio of primeval ball loading in 4.0 × 6.0m overflow ball Mill of Yingezhuang gold mine, the research results showed that it pertains to low hard and brittle ores, the accurate size ball should be used rather than big size ball due to mainly fines mineral are produced in the process of comminution. As the yield of intermediate granularity between 8 to 0.45 mm reach up to 50.34%,the intermediate particles should be strengthened in grinding, -400 mesh content is about 40% and -10um content accounts for a quarter of the grind products what showed that particles size are not satisfied and unfavorable to subsequent separation. The optimum scheme of primeval ball loading is that: ?70: ?60: ?50 ?40= 15: 15: 30: 40 for ?4.0 × 6.0m overflow ball mill, the separate sizes contents is 64.19% between 0.15~0.019mm which increasing by 19.14% compare with 44.78% and the mill -200mesh utilization coefficient increasing 12.6 percents compare with 0.14 about original program when ?4.0 × 6.0m overflow ball mill work itself alone, in addition, the mill -200mesh utilization coefficient increasing 11.71 percents compare with 0.1503 about original program when ?4.0 × 6.0m overflow ball mill and ?3.6 × 6.0m grate ball mill are working together.Keywords:Primeval ball loading; overflow ball mill; size ratio; optimize1. IntroductionThe designed daily processing capacity is about 4700 ton and gold deposit belongs to the type of quartz vein of Yingezhuang Gold Mine. As the ores are in short supply, the ?3.6 × 6.0m grate ball mill on and off, nevertheless, ?4.0 × 6.0m overflow ball mill working all along, The underflow particles returns to regrinding and the overflow particles enter into flotation subsequent after hydrocyclone about one stage grinding products, grinding flow diagram of Yingezhuang Gold Min as the figure 1 shows. ?4.0 × 6.0m o