YE283支架工艺及夹具设计说明书概要1.doc

四川大学锦城学院 本科生毕业设计 题 目 支架加工工艺及夹具设计 系 别 专 业 学生姓名 学 号 年级 指导教师 二Ο一五 年 月 日支架加工工艺及夹具设计 专业：机械设计制造及其自动化 学 生： 指导老师： 摘 要 本设计是基于支架零件的加工工艺规程及一些工序的专用夹具设计。支架零件的主要加工表面是平面及孔系。一般来说，保证平面的加工精度要比保证孔系的加工精度容易。因此，本设计遵循先面后孔的原则。并将孔与平面的加工明确划分成粗加工和精加工阶段以保证孔系加工精度。基准选择以支架的支承孔作为粗基准，以端面与两个工艺孔作为精基准。主要加工工序安排是先以支承孔系定位加工出顶平面，再以端面平面与支承孔系定位加工出工艺孔。在后续工序中除个别工序外均用顶平面和工艺孔定位加工其他孔系与平面。支承孔系的加工采用的是坐标法镗孔。整个加工过程均选用组合机床。夹具选用专用夹具，夹紧方式多选用气动夹紧，夹紧可靠，机构可以不必自锁，因此生产效率较高，适用于大批量、流水线上加工，能够满足设计要求。 关键词：支架类零件；工艺；夹具； Process and Fixture Design of Bracket Major: mechanical design manufacturing and automation Student: Tang Guojin The instructor: Huang Weiju Abstract The design is based on the body parts of the processing order of the processes and some special fixture design. Body parts of the main plane of the surface and pore system. In general, the plane guarantee processing precision than that of holes machining precision easy. Therefore, this design follows the surface after the first hole principle. Plane with holes and the processing clearly divided into roughing and finishing stages of holes to ensure machining accuracy. Datum selection box input shaft and the output shaft of the supporting hole as a rough benchmark, with top with two holes as a precision technology reference. Main processes arrangements to support holes for positioning and processing the top plane, and then the top plane and the supporting hole location hole processing technology. In addition to the follow-up processes individual processes are made of the top plane and technological hole location hole and plane processing. Supported hole processing using the method of coordinate boring. The whole process of processing machine combinations were selected. Selection of special fixture fixture, clampi