微量氧变送器 Teledyne InstaTrans 英文简介.pdf

TELEDYNE TELEDYNE ANALYTICAL INSTRUMENTS ANALYTICAL INSTRUMENTS Teledyne has redefined the ease and simplicity of detecting either ppm or percent levels of oxygen in a process with a single device – the INSTA TRANS™ O2 transmitter. By applying lessons learned from our Series 300T 300P intrinsically safe oxygen transmitter designs introduced in the late 1980s, and adding those parameters required by today’s users, the Insta Trans offers unprecedented: • Flexibility • Ease of use • Quick recovery on ppm O2 applications (when changing out sensors) • Reliability • Cost effectiveness FLEXIBILITY The Insta Trans is a two-wire, loop-powered 4-20 mA oxygen transmitter packaged within a weather tight NEMA-4 housing. The product was named for its built-in level of flexibility. It can instantly transform from ppm to percent (or vice-versa) simply by changing out the Teledyne sensor and resetting the range scale of the unit to ppm or percent via the function keypad. The operator can ensure proper changes have been made via the range indication continuously shown on the built-in meter. That’s it. No other electrical or resistor changes are required. By building this flex- ibility into the product Teledyne allows users the ability to conveniently move the Insta Trans from one point in the plant to another to tackle a variety of applications as required. The Insta Trans has six user selectable ranges from 0-10 ppm to 0-25 %. The user can easily change to the preferred range via the built in function keypad. In addition, depending on the corrosive nature of the sample, the Insta Trans can be supplied with either stainless steel or nylon wetted parts. EASE OF USE U