LB1937T-TLM-E;中文规格书,Datasheet资料.pdfVIP

Ordering number : EN7231 Monolithic Digital IC LB1937T 1-2 Phase Excitation Stepping Motor Driver Overview The LB1937T is a 2-phase bipolar drive stepping motor driver IC that supports low-voltage drive and can drive two stepping motors at the same time. The LB1937Ts miniature package and minimal number of external components reduces the required mounting area. It also provides high-efficiency motor drive and can reduce circuit current consumption. Since it provides a current detection pin and supports PWM control input, it can be used to implement current chopper control at the system level. The LB1937T is optimal for the stepping motors used for lens drive in digital cameras, printers, and movie cameras. Functions and Features • Low saturation voltage forward/reverse motor driver (VO sat = 0.3V at IO = 200mA) • Four H-bridge channels • Wide usable voltage range (Allowable voltage range: 2.5V to 9.5V, absolute maximum rating: 10.5V) • Supports PWM input (Low power consumption can be achieved in slow delay mode that uses IN1/IN2 = H/H logic.) • Motor (coil) current detection pin • Built-in thermal shutdown circuit • Thin form factor miniature package (TSSOP24) Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to standard application, intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any special applicat