Juniper JN0-120 认证学习资料.pdfVIP

Juniper JN0-120 Juniper Networks Jn0-120 Juniper Networks Certified Internet Associate.e(jncia-e) Practice Test Version demo 1.0 Juniper JN0-120: Practice Exam QUESTION NO: 1 How many spare line modules are supported for each redundancy group? A. 1 B. 3 C. 2 D. 5 Answer: A QUESTION NO: 2 When using a 40 Gbps switch fabric, how much full duplex bandwidth is available to each slot? A. 2.55 Gbps B. 1.25 Gbps C. 5.00 Gbps D. 1.65 Gbps Answer: B QUESTION NO: 3 Which configuration command enables the router for SNMP? A. snmp-client B. snmp-server C. snmp-server enable D. snmp-client enable Answer: B QUESTION NO: 4 Which command parameter configures a password of connection-to-lac for an L2TP tunnel on an LNS? A. l2tp password connection-to-lac B. server password connection-to-lac C. tunnel password connection-to-lac D. local password connection-to-lac IT认证- 2 Juniper JN0-120: Practice Exam Answer: C QUESTION NO: 5 In a Routed 1483 network what method of routing is typically employed on the DSL router? A. static B. RIPv1 C. OSPF D. RIPv2 Answer: A QUESTION NO: 6 Where does the LAC obtain the L2TP tunnels attributes? A. L2TP tunnel map B. DHCP server C. domain map D. profile Answer: C QUESTION NO: 7 What L2TP protocol packet is sent by the LAC to establish the control connection (tunnel)? A. L2TP Control Connection Request B. L2TP Tunnel Establishment Request C. Start Control Connection Request D. Start Tunnel Discovery Request Answer: C QUESTION NO: 8 Beginning with software Version demo 4-0-0.rel, how many virtual routers can be configured on the ERX Edge Router? IT认证- 3 Juniper JN0-120: Practice