超音速火焰喷涂碳化物金属陶瓷涂层冲蚀磨损性能.PDF

下半月出版 Material Heat Treatment 料热处理技术 超音速火焰喷涂碳化物金属陶瓷涂层 冲蚀磨损性能 富伟, 纪岗昌, 王洪涛, 魏雪冬 (九江学院 绿色再制造重点实验室, 江西 九江 332005) 摘 要 采用超音速火焰喷涂技术喷涂不同工艺的两种粉末袁得到Cr C -25NiCr 和WC-12Co 涂层曰对涂层的冲蚀 3 2 磨损性能进行了测试曰采用扫描电镜对原始粉末以及冲蚀前后涂层的组织形貌进行了观察 结果表明袁团聚烧结粉制备 的涂层组织较致密 粘结相含量较多的涂层袁其冲蚀磨损性能较差曰致密度较高的涂层袁其冲蚀 损性能较好 关键词 超音速火焰喷涂曰金属陶瓷涂层曰 冲蚀磨损 中图分类号 TG 174 文献标识码 A 文章编号 Erosion Performance of HVOF Sprayed Carbide Cermets Coating FU Wei, JI Ganchang, WANG Hongtao, WEI Xuedong (Key Laboratory for G ree n Re manufac turing, Jiuj iang Univ ers ity, Jiuj iang 332005, China) Abstract 院Cr C -25NiCr and WC-12Co coating were prepared using HVOF spraying technology with two type of 3 2 powders. The erosion performance was tested by a blast erosion tester. The morphology of feedstock powders and microstructure of coating were observed by SEM. The results show that the coating has high density which sprayed using agglomerated-sintered powder. The coating has bad erosion performance with more cohere phase and high erosion performance with high density. Key words 院HVOF; cermet coating; erosion 损失效是工业产品失效的主要原因之一 超 1 实验过程 音速火焰喷涂(HVOF)技术的出现对金属材料表面 抗磨损领域发展带来了新的突破袁尤其HVOF 技术 喷涂粉末为商用Cr C -25wt%NiCr 粉末 ( 团聚 3 2 制备的以WC-Co 和Cr C