OTDR和光功率计差别（国外英文资料）.docVIP

OTDR和光功率计差别 OTDR can measure the length of optical fiber breakpoints, and the optical power meter can only test the received optical power! OTDR will emit light to measure the distance from the optical fiber breakpoint to the test point. The optical power meter can only receive light and test the received optical power to determine whether the fiber is broken or not. The optical power meter can test the received power, and through the contrast obtained after the attenuation of light power. If you dont get the light, it means the fiber is broken. You can also test the OTDR attenuation, but the test results accuracy than the no light power meter. OTDR can also test breakpoint locations. The process of using the OTDR in the main line to see is full of attenuation, joint position, joint distance etc., can also be used in fiber, the optical power and light source module built-in. The light power machine, basically is to see what is the attenuation of cable to give you a specific value. Basically is a fixed value, check more obstacles. Used where there is a circuit. Optical power meter: used to measure absolute optical power or relative loss of optical power through a segment of fiber. In optical fiber systems, measuring light power is fundamental. Very much like electronic multimeter, in optical fiber measurement, light power meter is a heavy load commonly used table, optical fiber technicians should have one hand. The absolute power measurement of transmitter and optical network, an optical power meter to performance evaluation of optical equipment. The combination of optical power meter and stable light source can measure connection loss, test continuity and help to evaluate the quality of optical fiber link transmission. Stabilized light source: light emitted by a light system of known power and wavelength. The combination of a stable light source and an optical power meter can measure the optical loss of the optical fiber system. For ready - to - use optical systems,