proe教程（国外英文资料）.docVIP

proe教程 This book explains how to use Pro / ENGINEER in an easy to understand manner and numerous practical cases The wildfire 3 Chinese version or English version designed the 3D movement mechanism of the component product and carried out the position of the mechanism Set analysis, motion analysis, dynamic analysis, static analysis and force balance analysis. Coverage includes The basic flow of the mechanism design and the simple example: setting constraints to assemble fixed fixed groups A connection condition is set to assemble a movable component; a towing component is designed by a test mechanism The initial condition of the analysis and Simulation of the setting mechanism: defining the drive shaft and the electric force of the servo motor The specification of a motive; defines the loads and components required for dynamic analysis (e.g., gravity, gravity, motor, force) And torque, springs, dampers, etc.; defines advanced component connections (e.g. cams and gears); Perform various types of institutional analysis: location analysis, kinematic analysis, dynamic analysis, static analysis, and force analysis Balance analysis; dynamic simulation of playing and recording mechanism; data of movement of measuring mechanism (such as displacement) The speed, the acceleration, the load, the impact force, the impulse, etc., and the moving track on the key position of the mechanism The trace curve, the envelope shape of the mechanism movement, the analysis and Simulation of the component collision, and the mechanism design When the case (for example, motion tracking heap high machine of engine cylinder intake and exhaust valve mechanism etc.). This book focuses on the logical thinking of Pro / ENGINEER wildfire 3 when it is used From this book, I understand the concept of Pro / ENGINEER 3D dynamic mechanism design, not just limited to life Command position and command operation. This book provides quite a few examples of dynamic institutional design to enable readers Abilit