PS学习笔记（国外英文资料）.docVIP

PS学习笔记 1., if one of the images on the screen is yellow (Note: in particular, screen display), it can not be said that yellow light is too much, but should be said to be blue Too few light colors. Because the light color should prevail. We can order from the chromatographic ring measured their reverse color RGB color. Red to green, green to magenta, blue on yellow 2. what is the color channel? The 3.RGB mode is the physical color pattern of the display. This means: no matter what color patterns are used in the software Style, as long as it is displayed on the monitor, the image is finally shown in RGB mode. Therefore, using RGB mode is the fastest operation because the computer does not need to handle additional color conversion work. Sure Speed differences are difficult to detect, but theoretically. 4. in addition to visual inspection, you can also calculate the reverse color of any color. First, take the RGB value of this color, and then subtract the existing RGB value from 255. For example, the Yellow RGB value is 255255,0, then calculated: R (255255), G (255255), B (2550) Complementary colors are: 0,0255. Its blue 5. all the colors on the computer screen are made up of red, green, blue and three colors according to different proportions. This means, In fact, an image is made up of three images (red, green, and blue). 6. in the red channel grayscale, the brighter areas indicate that the red light is stronger (the component is more), and the darker areas indicate the red light Weak (less component). The description of the area where the white red light (corresponding to the strongest brightness value of 255), where the black end there There is no red light (corresponding to brightness value of 0). 7. blue A in R is black because green is one of the red color is not any red with gray in green and blue B R and B in magenta is shown in gray, black display in G White displays white in RGB, green displays black in Rb, and white in G The pure white in the 8. channel rep