《液压与气动技术》五.综合题（国外英文资料）.docVIP

《液压与气动技术》五.综合题 Hydraulic and pneumatic technology, five The main features of the 1. JZ - 7 air brakes have those? (1) can be used for the three pressure valve, and can be used for the two pressure valve, as long as the conversion conversion valve button off, truck position and distribution valve into the cover of the position, can adapt with a response type (two pressure valve) to alleviate or stage of the two kinds of different performance of the vehicle air brake. (2) can be automatic pressure. When needed to brake valve handle is placed within the area of decompression, you can get a corresponding decompression amount, and can achieve the purpose of automatic pressure, do not need to move from the valve handle to the neutral position to pressure. (3) the utility model is provided with a charging position, so as to meet the requirement of the locomotive traction group leader and the freight train with large traction weight, so as to shorten the initial charging and refilling time of the auxiliary vehicle cylinder and the auxiliary air cylinder of the vehicle (4) the valve handle is called the brake zone from the minimum pressure reducing position to the maximum decompression position. In addition, there is an excessive pressure reduction position, the handle taking out position and the emergency braking position, etc., which have larger decompression than the brake area (5) the distribution valve adopts a mixing form of two pressure mechanism and three pressure mechanism, which has both stage relieving performance and primary relieving performance (6) increasing the effective area of the charging and exhaust passage to the train pipe (7) since the valve and the single valve adopt the cam structure control method, the handle is light and flexible, and is not affected by the temperature change (8) the rubber membrane plate, plunger valve and O rubber sealing ring are adopted in the structure of the machine 2., try to explain the function of valve over charging posit