分享epson打印控制命令(ESCPOS)（国外英文资料）.docVIP

分享epson打印控制命令(ESCPOS) Share the Epson print control command (ESC/POS) for reference Development and application of Delphi / VCL components Print control command 5.1. print control command 5.1.1 overview BS-210BM provides the ESC/POS command set. Each command will be described below. The instructions for each command include formatting and interpretation in two parts. The format section provides three formats for the commands ASCII code, decimal code and sixteen enter code, which explain the function of the command in part. The format of the three commands is equivalent, and the user can choose any one as needed. 5.1.2 each command is described in the following format: Print command function Format: ASCII: represented by standard ASCII character sequences Decimal: represented by a decimal numeral sequence Sixteen decimal: expressed in sixteen digit sequence Description: the command function and instructions for use. 5.1.3 command description HT horizontal tabulation Format: ASCII:HT Decimal: 09 Sixteen decimal: 09 Explain： The print position is carried to the next horizontal tab position. If the current print position exceeds the last horizontal tab position, the HT command is not executed. The horizontal tab position is set by the ESC D command. LF print and word wrap Format: ASCII:LF Decimal: 10 Sixteen decimal: 0A Explain： Print a line of data stored in the line edit cache and move a line of paper at the current row spacing. ESC2, ESC3 instructions can set the length of the line spacing. If the line edit cache is empty, just move a line of paper at the current row spacing. CR print return Format: ASCII:CR Decimal: 13 Sixteen decimal: 0D Explain： After printing a row of data in the line edit cache, no paper walk is performed. ESC SP sets the right spacing of characters Format: ASCII:ESC SP n Decimal: 2732 n Sixteen decimal: 1B 20 n Explain： Set the minimum number of units (1/144 inches), set the character to the right spacing of n. The default value is n = 0. ESC!