变电运行资料 文本文档（国外英文资料）.docVIP

变电运行资料 文本文档 Operation of substation operation standardization review data, fill in the blank title: 1, grounding wire must be dedicated (wire clip) fixed on the conductor, winding method is strictly prohibited for grounding or short circuit. 2, in the (accident handling) process, you can not fill in the operation of the switch, but must be recorded on the duty record. 3, the work should be completed (second kinds of work tickets) on the two circuit without the need to cut off the high-voltage equipment. The impedance voltage difference between 4 and two transformers is not more than (10%). When the other conditions meet the requirements, the two transformers can be juxtaposed. 5. When the accident is being dealt with, (to rescue the electric shock personnel), extinguish the fire and rescue the emergency equipment, the attendant has the right to deal with it first, and then report it to the dispatcher. 6, the battery is strictly prohibited in operation and maintenance (short circuit). 7. Transformer zero sequence protection is the backup protection of (line). The high voltage side fuse of the 8 and 10KV voltage transformers may cause protection misoperation. Therefore, we should first disable (protection), and then deal with. 9. When the standby time reaches (3 months) and above, the AC voltage withstand test and the insulation resistance test must be done before the cold standby circuit breaker cabinet is ready. 10. The capacitor bank is disabled for more than half a year and must be tested before re entering. 11, a valve type arrester is installed at the neutral point of the transformer to protect against lightning stroke. The differential protection action of the 12 main transformer shows that the main transformer (internal) is out of order. 13. The wiring group of the transformer indicates the phase relation between the high and low voltage (line voltage) of the transformer. 14. The temperature in the battery room shall not exceed 35 centigrade. 15, 10KV, 35KV, 1