G71 G72 G73的讲解(外国英文资料).docVIP

G71 G72 G73的讲解 G70 P (NS) Q (NF) Format, I for the X axis (the radius of cutter withdrawal instruction, signed); for the bare Z axis Cutter Withdrawal (signed); D is the number of layers (refers to the number of coarse repeat processing). (2) illustrates the cycle path as shown in Figure 5, begin to move fast, J tool is C, then the tool based on layered rough turning allowance D times calculated for each cutting depth, number of cycles determining the cutting depth; turning circular track with G71 and G72, each cycle is a complete workpiece contour, this command can be processed in decreasing