LED生产工艺(外国英文资料).docVIP

LED生产工艺 LED production process and LED packaging process (briefly) A) cleaning: use ultrasonic cleaning PCB or LED holder, and drying. A: b) in LED tube core (wafer) bottom electrode prepared on silver colloid after expansion, will expand after the tube core (wafer) placed in the thorn crystal on the stage, will die a pad installed in the PCB or LED support corresponding with thorn crystal pen under the microscope then, the sintered silver glue curing. C) press welding: the electrode is connected to the LED core by aluminum wire or wire bonder to be used as the lead for the current injection. LED installed directly on the PCB, the general use of aluminum wire welding machine. (making white light TOP-LED needs wire welding machine) d) package: through the dispensing, with epoxy LED tube and welding line protection. On the PCB board dispensing, the shape of the gel after the strict requirements, which is directly related to the backlight products finished brightness. This process will also undertake the task of point phosphor (white light LED). E) welding: if the backlight is made of SMD-LED or other packaged LED, the LED shall be soldered to the PCB board prior to the assembly process. F) cutting film: use punch press cutting back light source for a variety of diffusion film, reflective film, etc.. (g) assembly: according to the drawing requirements, the various materials of the backlight are installed in the right place by hand. (H) test: check the backlight, photoelectric parameters and the uniformity of light emission is good. 2. packing: packing and storage of finished products as required. Two, packaging technology The task of 1. LED packaging is to connect the external lead to the electrode of the LED chip, protect the LED chip and improve the efficiency of the optical extraction. The key process for assembling, welding, packaging. 2. LED packaging form, LED packaging form can be said to be multifarious, mainly based on different applications, using the corres