PCB制造工艺流程(外国英文资料).docVIP

PCB制造工艺流程PCB manufacturing process.Txt28 life of the elderly is a wise, life is a learned teacher, it often salutary influence of education, silent to guide us, give us inspiration in life. Do not spare your love, open your heart, give more, and you will find yourself bathed in the river of love. PCB engineering, 7Href=, a, target=_a, is currently the most finished patchUsed pads importer friends believe that encountered, after conversion Protel PCB, copper rules automatically lost, leaving only the outside of the copper area border, this problem is indeed a headache. For the time being, I havent found a good way to apply the copper shape in import pads. The following method is only done by Protel in rule, and the pads is the same shape.? methods spacing copper and Outline: select Design-Rules-Routing-Clearance Constraint, add A add, set the Object Kind-Polygons, B Object Kind-Keep-Out, located in the distance, and select Any Net.The spacing between the copper pad and the SMD pad method: in addition to the B zone, the steps are the same, and the B zone is set Object-Kind-Smd Pad.Copper spacing and through hole pad setting method: in addition to the AB zone, step ibid., A area, fill in Component Class-All Components, B zone fill Object Kind-Polygons.After the Rules is set up, it will be checked by DRC, and the speed is slow. Just press ESC directly. Finally, double click on the copper area and select the appropriate layer, such as Polygon on Top. After clicking the OK button, you will prompt Rebuild to confirm it.I. manufacturing process flow of PCB:A , back of a film version.Back of a film version is printed circuit board production process leading, quality directly affects the back of a film version of the printed circuit board production. In the production of a printed circuit board, there must be at least a corresponding back of a film version. Each of the conductive patterns (signal layer, circuit pattern and ground power layer pattern) and non-conductive patter