基于ProEngineer的电动机吊座设计概要1.docVIP

学号： 24101901700 南湖学院 毕业论文（设计） 题 目： 基于Pro/Engineer 的电动机吊座设计 作 者 XXX 届 别 XXXX 系 别 XXX 专 业 XXXXX 指导老师 XXX 职 称 XXXXX 完成时间 XXXX 摘 要 本文介绍了7吨。要求根据已有研究成果，设计出该吊具座的几何外形；然后对所设计的吊具座进行静态强度分析、模态分析、疲劳寿命分析，并研究吊耳厚度等外形尺寸对吊具座强度、疲劳寿命的影响规律。本设计主要采用计算机辅助设计行业内非常著名的Pro/Engineer软件来对进行三维参数化虚拟设计。本设计方法不仅可以用来建立机构的三维参数化模型，同时这种方法也可以建立其它运动、承力部件的三维参数化数字模型Pro/Engineer有限元软件为平台，在电动机吊具座动力学性能仿真计算和疲劳寿命分析方面做有益的尝试和探索，这将有助于电动机吊具座设计质量和运行可靠性的提高。 关键词： Pro/Engineer；；虚拟设计 Abstract This paper introduces in detail the design of motor for seat, Motor for seat is an important component of traction motor, This paper introduces the appliance hanger for hanging large motor, The suspension of the weight of the motor is 7 tons. According to the requirements of the existing research results, Design a geometric shape the sling seat; Then on the base of analysis for static strength analysis, modal analysis, fatigue life, The ear thickness and size effects on the sling seat strength, fatigue life. Virtual design. This design mainly uses the Pro/Engineer software is very famous in the industry of computer aided design of vehicle and steering mechanism for 3D parameterization. This design method not only can be used to establish the 3D parameterized model of steering mechanism, digital model of three-dimensional parameters at the same time, this method can also create other motion, force bearing parts. . In this thesis, the finite element analysis technology as the foundation, the finite element analysis software Pro/Engineer, In the motor sling seat dynamics simulation and fatigue life analysis made beneficial attempt and exploration, This will help the motor sling seat design and operation reliability improvement. Keyword: Pro/Engineer, Sling seat, Life, Virtual design 目 录 摘 要 1 Abstract 2 第一章 绪 论 4 1.1引言 4 1.2电动机的应用与发展 4 3、本论文相关的国内外研究动态 4 1.3.1我国相关设计分析 4 1.3.2国外相关设计分析 5 1.4本文主要介绍的内容 6 第二章 基本理论和方法 7 2.1有限元概述 7 2.2结构动力学问题的有限元法 9 2.3随机过程的基本理论 9 第三章 电机的静强度和模态分析 11 3.1静态特性分析 11 3.1.1强度