单片机C语言_1602液晶显示器上显示24c02储存数据(国外英文资料).docVIP

单片机C语言_1602液晶显示器上显示24c02储存数据 /********************* contains the header files ****************************/ #includereg52.h #include intrins.h #define uchar unsigned char #define uint unsigned int /********************* definition LCD port *****************************/ LCD RS / RW, EN, P2.6, P2.5, P2.7 respectively is the port. The P0.0--P0.7 port is connected with the LCD / * D0--D7 * / data port SDA / * 24C02 and SCL ends are respectively connected with P2.0 and P2.1. 24C02 / * VCC connected to +5V, GND, A0, A1, A2, WP are connected to GND. /*************************************************************/ Sbit LCD_RS = P2^6; Sbit LCD_RW = P2^5; Sbit LCD_EN = P2^7; Sbit sda=P2^0; Sbit scl=P2^1; /*************************************************************/ / * * / / * * / delay subroutine / * * / /*************************************************************/ #define (); {_nop_ (); _nop_ (); _nop_ (); _nop_ ();} delayNOP; Void, delay2 () {;}; Void delay (uchar x) {uchar j; While ((x--) - =0) {for (j=0; j125; j++) {}; } } Void delay1 (uchar x) { Uchar, a, b; For (a=x; a0; a--) For (b=100; b0; b--); } /*************************************************************/ / * * / / * 24C02 memory chip set. / * * / /*************************************************************/ Void (start) / / start signal { Sda=1; Delay2 (); Scl=1; Delay2 (); Sda=0; Delay2 (); } Void (stop) / / stop signal { Sda=0; Delay2 (); Scl=1; Delay2 (); Sda=1; Delay2 (); } Void (respons) / response signal { Uchar i; Scl=1; Delay2 (); (while (sda==1) and i++ (i250)); //sda is 1 or 250 machine cycles after the response to the default response Scl=0; Delay2 (); } Void init () //24c02 initialization { Sda=1; Delay2 (); Scl=1; Delay2 (); } Void write_byte (uchar date) / / write 1 byte data { Uchar, I, temp; Temp=date; For (i=0; i8; i++) { Temp=temp1; Scl=0; Delay2 (); Sda=CY; Delay2 (); Scl=1; Delay2 (); } Scl=0; Delay2 (); Sda=1; Delay2 (); } Uchar read_byte (1 byte) / / read data { Uchar, I, k; Scl=0; D