孔槽系组合夹具设计 毕业设计.docVIP

编号 本科生毕业Slotted Modular Fixture Design 学 生 姓 名 专 业 学 号 指 导 教 师 学 院 二〇一一年六月 摘 要 组合夹具是一种先进的工艺装备，它是由一套预先制造好的各种不同的形状、不同规格、不同尺寸、具有互换性、高耐磨性和高精度的标准元件组成，其结构灵活多变，适应性广，元件可长期循环使用，组合夹具分为槽系和孔系两个系列，随着科技不断发展，组合夹具的应用程度在机械行业得到了很大的提高，特别是近年来机械行业领域正朝着高精度、高质量、高效率、低成本方向发展，因此为了适应现代制造技术的发展，组合夹具的发展也达到了更高的领域，其由原来的孔系组合夹具和槽系组合夹具发展到孔槽系组合夹具。孔槽系组合夹具是采用孔和槽结合的定位结构，克服了槽系夹具刚性差、不稳定，及孔系夹具不能连续调整的缺点，将孔、槽夹具的优势合二为一，其可用几小时的组装周期代替几个月的设计制造周期，从而缩短了生产周期；节省了工时和材料、保证加工精度，提高生产率、降低了生产成本，扩大了机床的工艺范围；还可减轻工人劳动强度，减少夹具库房面积，有利于管理。 关键词：组合夹具 孔系 槽系 孔槽系 Abstract Modular fixture is an advanced technology and equipment, it is a good set of pre-manufacturing a variety of different shapes, different sizes, different sizes, with interchangeable, high wear resistance and high-precision standard components, its structure Flexibility, adaptability, long-term recycling of components, integrated systems and fixture holes into slot two series, with the continuous development, the application of modular fixture degree in mechanical industry has been greatly improved, especially In recent years, is moving in the field of precision machinery industry, high quality, high efficiency, lower costs, so in order to adapt to modern manufacturing technology, the development of modular fixture also reached a higher field, the combination of holes from the original Modular Fixture fixture and development to Slot Slotted Modular Fixture. Slotted Modular Fixture is combined with the positioning holes and slots structure, to overcome the rigid tank clamp system is poor, unstable, and can not continuously adjust the fixture holes shortcomings, the holes, slots combined the advantages of clamp, which can be used The assembly of a few hours instead of months, the design cycle, manufacturing cycle, thus shortening the production cycle; save hours of work and materials, ensure accuracy, improve productivity, reduce production costs, expanding the