罩注塑模设计5.pdfVIP

罩注塑模课程设计 摘要 本课题主要是针对罩的注塑模具设计,该罩材料为聚丙烯 （PP），是工业生产中常见 的一种保护盖产品。通过对塑件进行工艺的分析和比较,最终设计出一副注塑模。该课题 从产品结构工艺性，具体模具结构出发，对模具的分型面选择、型腔布置、浇注系统、模 具成型部分的结构、顶出系统、冷却系统、注塑机的选择及有关参数的校核都有详细的设 计，同时并简单的编制了模具的加工工艺。由于成型零件形状复杂，脱模困难，我采用两 级脱模结构——弹簧二级脱模结构。通过整个设计过程，我们的罩注塑模是可以达到此塑 件所要求的加工工艺。 关键词:注塑模、罩、聚丙烯、分型面选择、型腔布置、浇注系统、模具成型部分的结 构、顶出系统、冷却系统、弹簧二级脱模结构。 Abstract The main topic covered for a round of injection mold design, the materials for the Polypropylene (PP), is commonly found in industrial production of a protective coverproducts. Through theprocess of plastic parts for analysis and comparison,thefinaldesignofan injectionmold.Theproductmix fromtechnology issues,and specificmold structureof thecastingmold system,mold formingpart of the structure, side pumped body, top of the system, the choice of injection molding machine and related calibration parameters are detailed design, at the same time and developed a simple process dies.For the shop of our product we use two levelsof demoulding structure. That is, the design of an injectionmold to produce plastic products in order to achieve automation to increaseproduction. Plastic parts for the specific structure of the mold is the spokes-style single-gate injection mold surface. Keywords：Injectionmold，roundcap，Polypropylene，Partingsurfaceselection， Cavity layout，the castingmold system,mold formingpart of the structure, side pumped body, top of the system. 罩注塑模课程设计 目 录 1 塑件的工艺性分析……………………………………………………………………1 1.1 塑件的原材料分析…………………………………………………………………1 1.2塑件的结构工艺性分析……………………………………………………………1 1.3 塑件的尺寸精度分析………………………………………………………………2 1.4 塑件表面质量分析…………………………………………………………………2 2 成型设备选择与模塑工艺规程编制…………………………………………………3 2.1 计算塑件的体积……………………………………………………………………3 2.2 注塑机的初步选择…………………………………………………………………3 2.3 塑件模塑成型工艺参数的确定……………………………………………………3 3 注塑模的结构设计……………………………………………………………………5 3.1