【测控专业英语】ProcessControlSystem过程控制系统探究.pptVIP

* 5 Process Control Most process controllers share a number of common features. They show the value of the setpoint, the process variable, and the controller output in either analog or digital format. They allow the operator to adjust the setpoint and switch between automatic and manual control. 大部分过程控制器有着其共同的特点。它们以模拟或数字格式显示设定值、过程变量和控制器输出。它们允许操作工调整设定值并选择自动控制或手动控制。 3 * 5 Process Control When manual control is selected, they allow the operator to adjust the controller output to vary the manipulated variable in an open-loop control mode. They allow the operator to adjust the control mode settings to “tune the controller” for optimum response. 当选择了手动控制，在开环控制模式下其允许操作工调整控制器输出以改变操作量。其允许操作工调整控制模式至“调节控制器”以达到最优响应。 3 * 5 Process Control Many controllers also provide for remote setting of the setpoint by an external signal, such as the output of another controller. A local / remote settings. 许多控制器也提供外部信号的远程设定值设定功能，如，另一个控制器的输出。 3 人有了知识，就会具备各种分析能力， 明辨是非的能力。 所以我们要勤恳读书，广泛阅读， 古人说“书中自有黄金屋。 ”通过阅读科技书籍，我们能丰富知识， 培养逻辑思维能力； 通过阅读文学作品，我们能提高文学鉴赏水平， 培养文学情趣； 通过阅读报刊，我们能增长见识，扩大自己的知识面。 有许多书籍还能培养我们的道德情操， 给我们巨大的精神力量， 鼓舞我们前进。 * * Unit 7 测控技术与仪器专业英语 Process Control System Chapter 2 Introduction to Control System * final control element 最终控制单元 sensing element 检测元件、敏感元件 signal transducer 信号变送器 temperature/flow/pressure transmitter 温度/流量/压力传感器 proportional/integral/derivative mode 比例/积分/微分模式 microcontroller 微控制器 switch 开关 Words and Expressions * manual control 手动控制 local/remote setting 本地/远程设置 on-off control 开关控制 cascade control 串级控制 bumpless transfer 无扰动切换 adaptive gain 适应性增益 pattern recognition 模式识别 Words and Expressions * Main content Process 1 Measuring Transmitter 2 Controller 3 Manipulating Element 4 Process Control 5 * 1 Process The process block in Fig. 7.1 represents everything performed in and by the equipment in which a variable is controlled. The process includes everything that affects the controlled or process variable except the controller