编花轮梳栉横移是由编花轮和链块或高速凸轮机构完成,采.PDFVIP

1.编花横移机构 Weaving Pattern Drive Device 编花轮梳栉横移是由编花轮和链块或高速凸轮机构完成，采 用四行程和编花链块或高速凸轮结合的横移运动方式。 Weaving-pattern wheel guide bar lateral moving is under control by weaving-pattern wheel and chain links or high-speed cam, it is using the lateral movement type of four-stroke and weaving-pattern chain block or high-speed cam. 2.牵拉机构 Draw-off Device 牵拉卷取系统EAC 采用与SVC 配套使用的30A 伺服驱动器， 坯布牵拉由 4 辊牵拉机构实现，布长计算准确、可靠，使用范围 广。 Draw-off batch system EAC is adopting 30A servo driver which is using together with SVC. Fabric draw-off is done by four-roll draw-off device，and cloth length calculation is accurate ，reliable ， use widely. 3.送经机构 Yarn Let-off Device 电子送经系统EBC 采用SVC 系列30A 伺服驱动器，操作系 统简单，人性化程度高，送经量控制精确、范围广。 Electronic let-off system EBC is using the series of SVC30A servo driver. the system is simple to operate, high degree of humanization, the yarn run-in control is precision 、rang widely. 4 ．成圈机构 Knitting Device 成圈机构由前针床和后针床组成，各自配有沉降床及 7 把导 纱梳栉。舌针床、沉降片床、梳栉针床采用偏心连杆机构传动。 Knitting device is made up of front needle bar and back needle bar, each of them both equipments with subsidence and seven guide bars. latch needle bar 、sunken bar and guide needle bar are adopting eccentric links drive. 5 ．贾卡装置 Jacquard Device 使用压电式贾卡装置，花型立体感更强、完整组织更大、工 艺组织更宜完成。 Use Piezoelectric Jacquard device to make pattern’s three-dimensional stronger, more complete organization pattern and the process organization is easier to perform. 机器用途： 采用涤纶和锦纶长丝、晴纶丝、氨纶丝等材料，可生产服装用及工业用面料，广泛应用在汽车 内装饰、鞋子面料、深层织物、特殊的网眼织物和带毛绒织物。 Machine usage: Using the materials such as polyester，nylon filament acrylic, acrylic yarn, spandex silk etc. it can produce clothing and industrial fabrics ，widely used in car’s inner decoration, shoe fabric, special mesh fabric and wool fabric. 主要规格 Main Specifications：