远程医疗设备故障的快速定位技术研究咨询.pdfVIP

论 著 RESEARCH WORK 远程医疗设备故障的快速定位技术研究 Research on Rapid Location Technology of Telemedicine Equipment Failure 1 2 1 [摘 要] 目的 为解决智能化医疗设备故障的远程监测中抗干扰性能差的问题，实现医疗设备故障 曾小宁 ，绍林 ，薛红 1 .万州区人民医院 设备科，重庆 的远程智能诊断。方法 提出一种基于统计特征故障信号处理的远程医疗设备故障的快速定位方 404000 ；2.重庆三峡医药高等专科学校 法。采用统计特征分析方法提取远程医疗设备故障工况的多变量时间序列，对多变量时间序列进 教务处，重庆 404000 行信号拟合，采用自适应匹配滤波模型进行故障信号干扰滤波，对滤波后的故障信号提取功率谱 密度特征。结果 实现医疗设备故障的快速定位检测。结论 采用该方法进行医疗设备故障诊断的 准确性较好，时间开销较小，具有较大的应用价值。 [关键词] 远程医疗设备；故障定位；信号处理；多变量时间序列 Abstract: Objective This paper aimed to solve the poor anti-jamming performance in remote monitoring failure problems of intelligent medical equipment, so as to realize remote intelligent failure diagnosis for medical equipment. Methods A rapid location method of remote medical equipment failure was proposed, based on statistics characteristics of fault signal processing. Using the method of statistical characteristics analysis, the study extracted multivariate time series of remote medical equipment fault and fitted signal of multivariate time series. Then, fault signal interference was filtered by self-adaptive matched filter model and the density characteristics of power spectrum were extracted from filtered fault signal. Results The rapid location detection of medical equipment was realized. Conclusion 1 2 This method has better accuracy and less time cost for medical equipment fault diagnosis, which has ZENG Xiao-ning , SHAO Lin , XUE Hong1 application significance. 1.Department of Equip